(110) - CASE IH QUADROBALE BALER (1/96-12/98) (109) - BALE STACKER, UPPER FLAP CONTROL (VAR.9045) Case Agriculture

发表于 2022-11-05 03:10:02

0次 0 0

Pos.	Part No	Qty	Parts name	Comments
1.	8308401	[1]	LEVER	R Shift lever
2.	932335R1	[6]	COTTER PIN,3.5mm OD x 36mm L, Slotted	IH Tensioning pin 3,5x 36a
3.	02356652	[6]	SPLIT PIN/SAFETY PIN	R Tensioning pin
4.	8308423	[1]	SHAFT	R Control shaft
5.	6321330	[4]	BOLT (SPREADER)	R Pin B10a12x 28
6.	6321270	[4]	FORK TEDDER	R Fork head G10x40
7.	100016	[4]	NUT,M10 x 1.5, Cl 8	NH
8.	8308451	[2]	ROD	R Pull rod
9.	8308431	[1]	LEVER	R Shift lever
10.	6496940	[6]	CYLINDER END CAP	R Bearing
11.	614-6020	[18]	BOLT,Hex, M6 x 1 x 20mm, Cl 8.8, Full Thd	CAS Superseded by part number: 120100
. .	825-1406	[18]	NUT,M6, Cl 8	CAS Superseded by part number: 86500688
. .	2393860	[18]	WASHER	R Contact washer Ers.d.2393860 Superseded by part number: 86588450
12.	732-5032	[4]	COTTER PIN,M5 x 32	CAS Split pin 5 x 32
13.	2342950	[4]	WASHER	R 2 mm
. .	2342340	[1]	WASHER	R 1 mm
14.	732-4025	[4]	COTTER PIN,M4 x 25	CAS Split pin 4 x 22
15.	2382920	[4]	WASHER	R
16.	2369420	[6]	LUBE NIPPLE,M6 x 1	R Grease nipple As 6x1 Superseded by part number: 321204
17.	8308472	[2]	PIN	R Axle
18.	8308463	[2]	HOOK	R
19.	9308870	[4]	SPRING	R Tension spring
20.	0085140	[2]	SPACER	R Bushing
21.	8309240	[1]	HOOK	R r.h. rechte Seite
. .	8309230	[1]	HOOK	R l.h. linke Seite
22.	614-8070	[2]	BOLT,Hex, M8 x 1.25 x 70mm, Cl 8.8, Full Thd	CAS Hexagonal screw M 8x 70 Superseded by part number: 412108
23.	43362	[4]	NUT,M8 x 1.25, Cl 10	BHB M8, Cl 10
24.	2381320	[2]	NUT	R Securing nut Vm 8 Superseded by part number: 86528579
25.	8309251	[2]	LARGE PLATE	R Coupler